Quickie Quotes

Quickies are made of the same material used in the M-16 rifle proving its impact resistant durability and resistance to heat, cold and corrosion
Rope is easily replaced when frayed OR with any length at any time
Double up the pulling power by looping the hook through the anchor point then hooking that end back onto the object
For some applications it may be helpful to remove the hook on the pulley block, replace it with a desired amount of rope, and attach another hook to the loose end of the rope
The Quickie is lightweight and has no sharp edges that can chip a paint job or scratch your chrome
We are always looking for new dealers, please contact us for more details
"What ever happens between the hooks is only limited by your imagination."
"You know there's nothing like a "QUICKIE" to put a smile on your face. 'Cuz you're usually not smilin' when using your strap tie-downs."
"Watch out for the imitators!"
"Until you've tried a "QUICKIE" you won't know what you're missing"
"The Quickest tie-down you'll ever get your hands on."
Quickie's 3/8" unit replaces a 1" ratchet strap, has a working load rating of 500 pounds and has been tested to 1,500 lbs of pull
Quickie's 1/4" unit replaces the bungee cord, has a working load rating of 150 pounds and has been tested to 600 lbs of pull
Constructed of highly durable and corrosion resistant material that works well in muddy and icy conditions and WON'T breakdown in the cold
The glass-filled nylon composite is hard like steel but 60% lighter, making Quickies better than imitators because they WON'T corrode or rust!
Large 2 inch dia. hooks on 3/8" unit makes tying down ATVs and motorcycles easier
Hooks are dip coated in black vinyl for a stronger bond, added durability and longer life, not to mention that they won't scratch your chrome
Recessed release triggers to eliminate accidental unlocking
Load Ratings are imprinted on the Quickie block and recognized by the D.O.T.

Products

Photo Contest

INTECH Enterprises is always on the lookout for any and all pictures of how you have used your Quickie tie-downs. Even enter with a picture of your oldest and most beat up, and probably still working, Quickie tie-down. It has been said that "only your imagination can limit what takes place between the two hooks". Enter now!

Product

Image of Quickie tiedown product

Made in the USA, Quickies are constructed of a glass-filled nylon composite. This UV protected material is highly impact resistant, and also resistant to heat, cold and corrosion.

Available in 3/8" and 1/4" sizes. Pre-assembled with 8" or 12" of low stretch and highly U.V. resistant braided polypropylene rope. This is easily replaced when frayed OR with any length at any time, making them totally customizable.

Specifications

Lightweight yet durable construction: 3/8" - ONLY 374g, 1/4" - ONLY 168g
Outer block casing, pulley wheel and pawl (release trigger) is extruded from glass filled nylon
Hooks are zinc plated steel wire with black vinyl coating: 3/8"is #141 -5/6" dia., 1/4" is # 86 -1/4" dia.
Torsion springs are stainless steel wire: 3/8"is .04" , 1/4" is .03"
Rope is low stretch and highly UV resistant, made of 12 braid polypropylene (black)
Screws are industrial grade, black phosphate coated with zinc
Rivets are C-1006, AKFG, CHG wire, SAIP, zinc phosphate plated

Operation

Attach rope hook to secure object
Release required length of rope and attach Quickie hook to load or firm support. For Maximum pull, hooks and block should be in line with direction of pull
Tighten by pulling loose end of rope until tightly secure. It works best to always pull in the same direction as the pulley block
To release, pull on loose end of rope to ease tension in locking mechanism WHILE pressing release trigger. DO NOT pry the trigger! When operated properly trigger should always be easily deployed

To Change Rope: Remove existing rope. Depress release trigger and, following the direction of feed arrow imprinted on pulley block, thread rope in bottom of block. Use finger to rotate pulley wheel and pull rope back out bottom of block.

Warranty info

Quickie Tie-Down Enterprises, Inc. warrants its products to be free of defects in composite materials or workmanship. Warranty is limited to replacement of defective unit only. Warranty does not cover worn or frayed rope and rubber coating on hooks or damage caused by misuse, abuse, or use contrary to Quickie Tie-Down Enterprises, Inc. specifications and instructions.

The use and attachment of this product is beyond the control of Quickie Tie-Down Enterprises, Inc. The liability of this product is limited to the replacement cost of this product should it be found defective in material and/or workmanship.

WARNING
MUST READ BEFORE USE

Failure to comply with this warning may result in Tie-Down failure, serious personal injury, or death. Use of this product demonstrates an understanding of this warning and the risks involved.

Never exceed working load limit (displayed on Quickie block)!

Inspect unit before each use. Do not use if any signs of damage, deformation, or alterations are present.
Rope should not be used if abrasions, cuts, tears, burns, knots, or alterations are present.
Always protect rope from sharp or abrasive surfaces.
Hardware must be pulled in a straight line or strength will be reduced.
This Tie-Down assembly is not designed for lifting, towing or personal restraint.
Refer to Federal, State, Provincial, Industry or local regulations for proper Tie-Down methods.

Quickie Tie-Down is covered by US Patent No. 6068242 - 362,614 - 6092791

Quickie Tiedown .ca